Revolutionary, Chemical-Free Water Purification Solutions
for Your Pool & Spa
Our patented NanoTitanium® Technology for Pools & Spas is a Revolution in Water Purity!
Tired of scrubbing your Spa?
Tired of mold and mildew on your Spa Cover?
Would you like to use fewer chemicals in your spa or pool?
|NanoSTICK® for Pools & Spas||NanoSPRAY® for Spa Covers|
|Safe, non-chemical water clarifier||Easy to use|
|Utilizes light to reduce organics||Completely safe|
|No byproducts left in the water||21st Century Patented Technology|
|Compatible with all sanitizers||Lasts 4 to 6 months|
|No affect on pH||No installation|
|Lasts 4 to 6 months|
The NanoTITANIUM® within the ceramic media inside the NanoSTICK® is activated when it comes into contact with both light and water. It stays active for 4-6 months. Once activated, the NanoSTICK® continues doing it’s job even if it is under a spa cover much of the time. Each time the spa is uncovered, light “recharges” the STICK.
NanoSTICK®s do not add anything at all to the water.
The NanoStick® for Spas is designed for approximately 500 gallons of water. They are placed in the spa and left there for 4 to 6 months, depending on how much organic contaminant they come in contact with. They are small, only 1″ x 10″, so they are usually not noticed. If having something in the hot tub or spa with you is a bother, you may remove it while you are in the spa and replace it when you get out. The NanoStick® will Zap body oils, dead skin, and other organics in the water. This greatly reduces your need to clean those organics from the spa after its use, making spa owners quite happy!
NanoSpray® for Spa Covers is used as a preventative, not a cure. This means you must first clean and dry your spa cover, then apply the NanoSpray®. The NanoTITANIUM® technology employed in the NanoSpray® will prohibit molds and mildew from growing on the spa cover for approximately 12 weeks before it needs to be re-applied.
A single NanoStick® for Pools will work for approximately 10,000 gallons of swimming pool water and last from 4 to 6 months. They are usually hung off the back side of the ladder, out of the way and unnoticed. The children playing in our pool pay no attention to it at all. NanoSTICK® for Pools do not replace pool chemicals, but they do significantly reduced chemical consumption and make maintaining chemical balance easier.
NanoStick® with Salt Chlorine Generators. If you have a salt chlorine generator you will also want to use a NanoSTICK® for a couple of reasons. First, the NanoSTICK® will act as a chemical-free chlorine stabilizer because it Zaps organics on contact, reducing chlorine consumption. In contrast, an overdose of chemical stabilizers will impair chlorine effectiveness and is difficult to remedy. Additionally, the organics killed by your chlorine remain in the water. NanoSTICK® will Zap the live or dead organics, body oils, suntan oils, and sunscreen and they disappear – making your pool water sparkle!
NanoStick® can also used be in fountains and even ponds! The size of stick needed, whether pool or spa sized, depends on your volume of water. Keep in mind quantities are also dependent on volume of water when ordering NanoSTICK®.
Made in the USA